Watch Back Case Press Set, Watch Press Set Watchmaker Repair Tool with 20 Dies Mould for Watch Back Case Close, Blue
product inoformation
| Brand Seller or Collection Name | HARFINGTON | Model number | hta221107hh0336 |
about item
- Size - Press Total Size: 130 x 72 x 230mm / 5.12 x 2.83 x 9.06-inch(L*W*H), Round size: 50/48mm,45/43mm,42/40mm,38/36mm,34/33mm,32/31mm,30/28mm,26/24mm,23/21mm,20/18mm,16mm,25/20mm,Square size: 45mm,40mm,35mm,30mm,25mm,20mm,Shield size: 44mm,37mm
- Material - The press is made of plastic, non-slip grip design, more stable and easy pressure application. The dies are made of ABS plastic, which will not scratch the watch crystals glass.
- Feature - The arm of the press is spring loaded it keeps the press in the open position.The spring is nice and does not require too much pressure to close it. The handle surface have stripes,non-slip and durable.
- Application - The inserts of dies can be screwed to the watch press tool, which is convenient to use.
- Note - Please make sure to use the correct fitting dies to avoid damaging the watch.
Product Description
|
|
|
|
|
|---|---|---|---|
Step 11. Choose a mold larger than the watch glass and smaller than the dial to be placed on the bottom plate of the watch press tool. |
Step 21. According to the size of the watch back cover, choose a slightly smaller mold and install with screw at the lower end of the watch press pillar. 2. First raise the column, and then install the mold on the watch press. |
Step 31. Place the watch to be covered in the correct position, gently place the cover on the back of the watch, and place the post too high first. |
Step 41. Gently press the cover, align it, and press firmly. 2. Press the table cloth mat, so that you can better protect your watch. |
Watch Press Set
relate article
People Also Search
Relate goods
