10 Sterling Silver Ring Spacer Bead For European Story Charm 3mm Snake Chain Cable Bracelets

product inoformation
Brand Seller or Collection NameQueenberry Metal stampNot stamped
MetalSterling Silver MaterialSterling Silver
Diameter7 millimeters ResizableNo
Model numberPA1564X10
about item
  • 10 pieces of Sterling Silver Ring Spacers
  • Solid 925 Sterling Silver (no stamp) in Polished Finish
  • Approximately 4.9mm Hole Size
  • Fully compatible with European-style Charm Bracelets.

Reviews with images:
Videos for this product:

Love it

Top reviews

Benjamin Middleton
These are finally what I was looking for to fit my Pandora bracelet. They're the perfect size and are made so nicely. Great shine...sterling silver. Great looking spacers which is what I needed them for. Going to buy another set. Really recommend.

Brandon Wilson
These are tiny silver rings, much smaller than a normal bead but still shiny and bright. I bought this set to go with the 10 rubber stoppers I also bought. They fit over both my Pugster watch and Pandora snake bracelet just fine, along with rubber stoppers, and work exactly as intended - to prevent my beads from falling off the ends. It takes a bit of effort to cram the rubber into the silver ring - and I highly recommend putting the rubber ring on separately from the silver ring. Thumb nails or maybe a flat-tipped jewelry pliers help with stuffing the rubber into the silver ring. Once seated properly, they are effective stoppers.

Mr. Anthony Carr
These are very nice. Had them a year. Put them on a small snake chain necklace with clear silicon stoppers inside. That prevents them from being tilted and they don't slide around as much. The chain is either 2mm or 3mm. The spacers and silicon stoppers should work for either size. But just know that in my case, they are not stoppers but they do fit.Pro Jewelry 500 High Quality Silicone Rubber Stoppers (Mixed Black & White) for Use Alone or with Clip Lock Spacer Charm--> http://www.amazon.com/gp/product/B004RS7FNG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1They cost less than a year ago too!BOUGHT AGAIN IN 2016 - they now have 'seems' showing and have a slimmer profile and are larger around. I tried to mix them with my order from a few years ago and it didn't work. I'm still using them on a necklace. If they were used as spacers then there shouldn't be an issue but the quality has gone down.

Robert Morris
These are cute dainty little spacer beads, I wish they were a tad bit bigger, otherwise they work well! They are nice and shiny to which I love that. Again a speedy delivery which is always a plus and thank you for the free shipping that helps alot!

Laura Jones
I ordered these for a new bracelet along with a pack of 10 silicone stopper rings. I wanted a low-profile way of keeping the current beads in place that didn't cost as much as the standard locking beads or spacers from the bracelet manufacturer. I think these actually look more classy than many of the clips or stoppers offered by the bracelet manufacturer. There are only 3 beads on the bracelet so far, so they moved around too much and wouldn't stay grouped together. The description on these silver rings didn't say they would work with the silicone stoppers, but for the extra few dollars it was worth the risk. I was pleased to find out that they do work with the silicone rings, and there is a small groove on the underside of the silver rings that allows the silicone stoppers to stay snugly fit! I will say it's a little difficult to push the silver rings over the silicone rings because they don't come unclamped and I don't know if they are necessarily designed to work with the silicone rings that I also found on Amazon. I found it the easiest to hold the silver ring in place then push the silicone ring under the silver ring with my fingernail or a small paperclip. Once in place, they hold great and will keep the beads in place wherever needed. You could also use these without the silicone rings just as spacers. They are very small, smaller than the standard spacers or locking beads from the bracelet manufacturer, but not so small that you need to screw them over the built-in stoppers on the bracelet. Without the silicone stopper, they freely slide over the small end of the clasp. Because these are not offered by the bracelet manufacturer, this provides a very unique look to the bracelet and really compliments the larger beads.

Jeremy Hanna
I use these to fill spaces between charms on my Pandora snake chain bracelets. I don't place those silicone stoppers in them, just let them dangle loosely on the bracelets between larger beads. It makes the bracelets look more interesting by framing each charm, really makes them all stand out individually. I purchased two sets, so twenty spacers total, because I place two or three between charms. Good quality, real sterling silver, Queenberry has been an excellent seller thus far.

Miss Michelle Torres
These work wonderfully. I also bought the silicone rings to insert inside. I find they fit onto my Pandora snake bracelet perfectly. It's nice to place them in between my charms. It holds them in place so you can spread your charms out. I personally prefer to space the charms out a little bit so as you can see the charms individually. Be prepared to have to wiggle them on and use quite a bit of pressure if you are using them with the silicone rings inside. But that's exactly what I was looking for....something to secure the charms into place.

John Miller
These are lovely spacers for my Pandora Charm Bracelets. They are made well and are high polished. The only complaint I have is that I thought they would be a bit larger. Be sure to keep this in mind, these spacers are not the same size as the standard spacers on Pandora like bracelets. If you are good with that, then these are for you.

Relate goods