Battery detector function

When the battery becomes nearly empty, the second hand

starts moving every 2 seconds for about 2 days.

Wide Variety of Designs Available

・Dial- No need of transparency.

There are materials, colors, patterns and finishing on your choice.

・Hands- Materials and designs on your choice.

Strong balance weight of second hand, unlike ordinary solar movements.

(0.09μN.m, even stronger than 2035 with 0.07)

Hand size also does not effect the charging efficiency.

Easy to Assemble & Use

・No need of special techniques for assembly.

・“Quick start” function helps you when the battery runs out.

Expose the watch under office light for 10 seconds(second hand start working once in 2 seconds.)

・Starts operating regularly by exposing under fine weather for 2 hours.

Matching Scrub band Colors

• Choice of 4 different colored bands
• easy to clean bands
• silicone bands
• comfort and style

Power saving function =Eco mode

• The crown is pulled out to the 1st position.
• Same as other Quartz movements, this movement also has Powercell Saving Reset Mechanism.

Overcharging prevention function

• This function stops charging the battery to be charged more than the predetermined voltage, preventing deterioration and breakage of the rechargeable battery.

Quick Start and Battery Detector function

• This function helps you to understand whether the movement is out of battery or whether the movement is stopped with a problem.
• When the watch stops completely due to insufficient charging, the watch will move again if you place it under the office light for a while.
• The second hand moves every 2 seconds until the battery is charged to some extend.

Shock detection & Power generate detection function

• The smart IC detects the external shock and prevents hands' jumping.
• In an office (under more than 500 Lx condition), the pulse generator outputs signal every 2 seconds for 1 minute by pulling out the crown to the 1st position.