Melinda Joseph
Makes my life soo much easier now. Piercing is a breeze. But this tiny tool is expensive.
Body Jewelry Ball Holder/Removal Tool - 2 Sizes Per Tool (5mm & 6mm)
product inoformation
Brand Seller or Collection Name | youbay | Metal | argentium-plated-stainless-steel |
Gem Type | no gemstone |
Product Description
Reviews with images:
Videos for this product:
Top reviews
Heather Johnson
I needed this to tighten up my septum horseshoe and it's amazing! Recommend! No more fumbling and dropping the tiny balls.
Kathryn Campos
I purchased 5 of these to help in my piercing studio. Their description says they are safe to put into the autoclave for sterilization. I tested them out before cleaning and sterilizing them and they worked great. However, as soon as I sent them through the autoclave, the inserts shrank away from the metal. The 3mm ball end barely fits over a 2mm ball now, and when trying to get the ball seated into the silicone, the whole silicone piece retracts back up into the metal tube. Wasted money!!! DO NOT BUY THESE IF YOU CARE ABOUT MAKING CERTAIN THEY ARE CLEAN AND STERILIZED FOR YOUR CLEINTS. VERY DISAPPOINTED!
Julian Freeman
This is absolutely PERFECT for reinserting balls on my rook and conch piercings!! I've come to the conclusion the negative reviews are all from people who don't know the correct diameter of their piercing balls and bought the wrong size tool. There is such little margin for error if you know which way a screw turns and you order the correct size tool.The ball literally cannot go up inside the tool and get stuck (which is one concern I had) nor is the material inside made of hard plastic - it's squishy. The piercing balls do fit snug as they are supposed to, so they don't fall out.The only way I could see the tool giving someone trouble (given they have the correct size) is if they have externally threaded jewelry, and the side of the ball that is internally threaded got flipped around somehow in the tool - in that case buy higher quality jewelry, that's not the tools fault. Externally threaded balls literally CANNOT get stuck or flipped around inside of the tool.I waited so long to purchase this tool because I feared it was going to be cheap garbage and not work at all because of the reviews - but that's not the case at all. It's not even made in China! So much time I could've saved, so much sooner than now 🥲
Taylor Adams
So this does work as intended. It helped me screw in my 3mm ball end onto my rook piercing easily. Which is great cause it's a super awkward place to try to screw on a tiny ball end. The issue is that it hold TOO tightly. I could not get it to let go of the ball without putting a really painful amount of force on my piercing. It helped to slightly lube it up with some anti bacterial ointment I had handy. It does work, just be careful.
Rebecca Wilson
As a piercer I have clients that have issues putting on their own jewelry. This makes the process a breeze. Long nail friendly.
Anthony Ramos
Body Jewelry Ball Holder/Removal Tool - 2 Sizes Per Tool (3mm & 4mm)The best way to handle balls that are difficult to install because of size/angle, problem solved, the ball is snugly retained in the proper size hole 3mm or 4mm on the ends, while you use this to grip the ball to install or remove, quickly, professionally & efficiently. Be sure to order exact size for your needs, these only fit what they are designated for. There's a slight technique to releasing the ball from the tool, try it on a piece of jewelry first to see, these are great and I love having this tool to assist me in my work!
Mr. Eric Wagner
It works for the most part 7/10